A MEMS Clearinghouse® and information portal
for the MEMS and Nanotechnology community
RegisterSign-In
MEMSnet Home About Us What is MEMS? Beginner's Guide Discussion Groups Advertise Here

Vibhor Khanna's Resume
File Attachments:
Vibhor_fab.pdf (47.7 KB, application/pdf)
attached by vibhorkhanna (Vibhor Khanna) on 2008-05-03 05:55
Resume for details regarding my experience and qualification. Available for joining from June,2008.

ContactG-11 Bali Nagar
New Delhi, Dl 110015
IN
+91-9969065649
[email protected]		 GoalTo act as a catalyst in the research and development of MEMS, Microelectronics technology
SkillsClean room fabrication, VHDL, Verilog, MATLAB, Modelsim, Autocad, Clewin, C/C++, Labview
QualificationsPursuing master of technology in Biomedical engineering from Indian Institute of Technology Bombay, Mumbai, India with core specialization in the field of MEMS.

Fabrication Technologies:

  • Hands on experience on oxidation furnace, ellipsometer, wet bench (mainly TMAH), RCA clean.
  • Exposure to sputtering (Metal/Dielectric), RIE, profilometer, Evaporation systems.
    Design tools:
  • EDA Tools: Xilinx, ModelSim.

Languages:

  • Programming Languages: C, C++
  • Hardware Description Languages: VHDL, Verilog

Others:

  • MATLAB, Origin, LabView, LabWindows CVI, AutoCAD, SPSS, CleWin


PROJECTS

Microsensors for Explosives Detection: Designed / Fabricated MEMS sensors for trace detection of explosives.

Project done at Micro Fabrication facility, IITB.
Project guide: Prof. Soumyo Mukherji, Professor, S.B.B., IITB.
Co-guide: Prof. V. Ramgopal Rao, Professor, E.E., IITB

Robotic Arm: A 2 D.O.F. robotic arm was made and controlled depending upon sensor(s) input. The arm was restored to the initial position, after sudden power failure.

Real time ECG monitor and Display: Real time monitoring and display of the ECG on 128X128 pixels graphical LCD. Parallely, LabWindows CVI was used to prepare a GUI to collect data using DAQ card and analyze it for conditions like Bradycardia / Tachycardia etc.

Digital thermometer: Accurately encode the analogue signal from the sensor and maintain a log file containing the reading along with the time of its recording.

Line following Robot: Based upon the signal from the four IR sensors, the base motors would be driven by the microcontroller to follow a line.

Digital clock: Clock was displayed on PC via serial link which could be programmed for hours, minutes.

LANGUAGES English, Hindi
Updated: 2008-05-03
Terms of Use | Contact Us | Search
  • Files 1