Maryla,
You may try to use DRIE in stead of KOH to produce the window membrane. I
did this process before.
Good luck
David
----- Original Message -----
From:
To:
Sent: Monday, January 10, 2005 5:20 AM
Subject: [mems-talk] Si02/Si3N4 membranes
> Hi all
> I was wondering if someone could help me.
> I am trying to etch SiO2/Si3N4 membranes in 100 Si wafer. The thickness
> of the Si3N4 and thermal oxide layers are 100nm
> and 2.5micron, respectively.
> The Si3N4 layer is removed by the RIE , while SiO2 in BHF and
> then etched in KOH to produce the window membrane. Unfortunately, each
> time I repeat my process the membranes brake.
> Could someone advise me why this is happening and suggest solution to
> this problem.
> Also, what are the best conditions for fabrication of the SiO2 membranes?
> Thank you very much in advance.
>
> Maryla
>
>
>