Hello Rashmi
Thanks for the reply. I am using 400W ICP, 100W RIE and 10mT pressure.
CF4+O2 combination is going to etch both Si and SiO2 right. How am i
gonna get good selectivity. I dont have CHF3 gas with that system. Any
suggestion for the flow rates of CF4 and O2?
~Satish
On Thu, Apr 10, 2008 at 3:40 PM, Rashmi Rao wrote:
> Satish,
>
> What is the power and pressure regims that you are using.
> Typically it is better to use CF4 with O2 to etch SiO2 and this usually has
> very good selectivity between Si and SiO2.
>
> The C: F ratio determines the selectivity.
> You can also try a combination of CF4/CHF3/O2.
>
> Rashmi