Try raising the pre-bake to 160-165, you may also want to mix the RD6 3:1
with water to increase the development time.
-Alex
On Wed, Sep 21, 2011 at 12:02 AM, Xiaohui Lin
wrote:
> Hi all, I was processing NR9-1000P and find the sidewall pretty rough. Pic
> can be found here:
>
>
> https://picasaweb.google.com/113316121597573259487/September20201102?authuser=
0&authkey=Gv1sRgCOv_isDQ1MeRhwE&feat=directlink
>
> Could anyone suggest any possible solution for that?
>
> 1. substrate: 1mm glass slice, one side is coated by Cr/Au, 10nm/40nm
> 2. spin on NR9 at 3000rpm, we are aiming at around 1um thickness, not
> critical
> 3. pre-bake: 150 oC hotplate for 3 min
> 4. exposure: MA6, Ch1, hard contact, 10s, 7.5mJ/cm2
> 5. PEB: 100oC hotplate 3 min
> 6. develop: RD6, 20s