This is a multi-part message in MIME format.
------=_NextPart_000_0008_01BE667D.28F8ED20
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I am looking for information on bonding or sealing of glass to glass. =
The glass parts come in the form of polished flat substrates, and can be =
as thin as microscope slides or as thick as photomask blanks (0.90 =
inch). The bond should be direct--I would like to avoid using bonding =
films or adhesives. However, glass-based bonding layers which can be =
deposited on one or both of the glass substrates would be alright. The =
bonding can be done at any temperature provided the glass parts are not =
deformed or distorted. The glass can be any of the commonly available =
commercial glasses such as soda-lime, borosilicate, or even fused =
silica. I would appreciate any information or leads.=20
------=_NextPart_000_0008_01BE667D.28F8ED20
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I am looking for information on bonding =
or sealing=20
of glass to glass. The glass parts come in the form of polished flat =
substrates,=20
and can be as thin as microscope slides or as thick as photomask blanks =
(0.90=20
inch). The bond should be direct--I would like to avoid using bonding =
films or=20
adhesives. However, glass-based bonding layers which can be deposited on =
one or=20
both of the glass substrates would be alright. The bonding can be done =
at any=20
temperature provided the glass parts are not deformed or distorted. The =
glass=20
can be any of the commonly available commercial glasses such as =
soda-lime,=20
borosilicate, or even fused silica. I would appreciate any information =
or leads.=20